The right repair for the tap design
Leak position checked
We distinguish an internal drip from a base or supply connection leak.
Suitable parts selected
We match washers, seals, cartridges or valves to the fitting where possible.
Flow and joints tested
We restore pressure and check operation after completing the repair.
Stop the drip at the correct component
A dripping tap may need a washer, seal, cartridge or valve, depending on its design. Leaks around the base can instead come from a connection or failed seal beneath the fitting. We inspect where the water appears and how the tap operates before isolating the supply. Stiff handles, noise and poor flow can also point towards worn internal parts or restrictions. Once we know the tap type and likely failure, we can replace a suitable component, remake a connection or discuss complete tap replacement. That saves changing the whole fitting when a sound repair is available, while avoiding a patch where the tap is beyond sensible repair.


Useful details before we turn off the water
When contacting us, send a clear photo showing the tap style and where the leak appears. Tell us whether it serves a basin, bath or kitchen sink, and whether you know where the local or main isolation valve is. We diagnose the fault, isolate the water and dismantle only what is needed to reach the failed part. After fitting or refitting, we restore the supply and test flow, pressure and all disturbed joints for leaks. A tap repair can be handled on its own. You do not need a new bathroom attached to the enquiry, although we can help with that too.
Frequently asked questions
Does every dripping tap use a washer?
No. Traditional taps may use washers, while many modern designs use cartridges, ceramic valves or other seals. We identify the fitting before selecting a replacement part.
Can a leaking tap base be repaired?
Often, but the remedy depends on whether water comes from an internal seal, the fixing area or a supply connection below. We trace the leak before dismantling the fitting.
When should a faulty tap be replaced completely?
Full replacement may be sensible when the body is damaged, badly worn or incompatible with available parts. We can explain the repair and replacement options after inspection.
